Bypass Oil Filtration Unit

Product Details:

Hydraulic oil filters for the bypass flow have the task of filtering the operating fluid located in the hydraulic container in a separate circuit, of relieving the oil filters in the main flow and thus of increasing the availability of the system while simultaneously reducing the operating costs.Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×

Product Details:

The Destiny's Bypass Filter System is a bypass oil filtration system that passes only a small portion of the total oil flow through a very dense filter cartridge at about 3 to 4 liters per minute. At this speed, it is possible to remove particles down to 1 micron  and remove 99.95% of all water, greatly decreasing wear and prolonging oil life. Destiny can eliminate water and particle contamination, extend oil life up to 5 times and hydraulic oil up to 10 times, remove particles down to 1 micron, and is applicable to hydraulic systems.Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×

Additional Information:

• Delivery Time: 1-2 DAYS

Product Details:

 Bypass Filter System is a bypass oil filtration system that passes only a small portion of the total oil flow through a very dense filter cartridge at about 3 to 4 liters per minute. At this speed, it is possible to remove particles down to 1 micron (3 absolute) and remove 99.95% of all water, greatly decreasing wear and prolonging oil life. DESTINY INTERNATIONAL can eliminate water and particle contamination, extend oil life up to 5 times and hydraulic oil up to 10 times, reduce engine wear and component wear, dramatically reduce downtime, remove particles down to 1 micron (3 absolute), and is applicable to engines as well as hydraulic systems.

Destiny International filtration unit is made of cast aluminum with a galvanized steel mounting bracket.

There are few basic sizes, which are installed according to the applications.

It is connected to the engine lubricating oil circulating system in a bypass loop using high pressure braided hose and fittings to SAE standards.

The Hydraulic Bypass Filtration Unit can be fitted as single or multiple units, dependent on the volume of oil in the system. This high pressure oil filter can be fitted on the bypass basis to hydraulic systems, compressors, or any system with oil at pressure up to 3000psi. The flow is controlled to approximately 4 litres per minute at 40psi. This rate is low enough to have negligible effect on most system pressures, yet high enough to ensure that the oil is kept in an as new condition.

Benefits of Bypass Oil Filtration Units

1. Good for the Environment
2. Reduces Time Needed for Service
3. Continuous Protection Provided
4. Removes Dirt and Contaminants
5. Desirable Elements Retained
6. Extends Drain Intervals

FEATURES:
 

1.   Very compact and light bypass oil cleaners.
2. Connects directly to the high pressure line. No motor and pump necessary           
3. Designed for hydraulic systems up to 250 bar system pressure.
4. With built-in pressure and flow control valve, safety valve and pressure gauge for checking element change
5. Low running cost, easy installation & maintenance.

 

 

TYPICAL APPLICATIONS:
1.  Injection moulding machines.
2.    Die-casting machines, metal working machines, like bending- cutting-, punching machines
3. Mobile hydraulic equipment.
4. All hydraulic systems with continuous pressure and fitted with proportional or servo-valves, and other high-tech hydraulic        equipment.

Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×